A properly functioning plumbing system is an integral aspect of your house. Sometimes, your plumbing needs attention and you may not be able to afford a plumber or it may be a bad time to call one. The following article offers some helpful tips on fixing and maintaining your plumbing at home.
On very cold winter nights, allow your faucets to trickle slightly, especially if your pipes are located in a crawlspace. The running water prevents the pipes from freezing as quickly as they would otherwise. You can catch the water and use it for other household needs to prevent wasting it.
If you have noisy pipes, you can cushion them with a rubber blanket or add additional anchor straps. Banging pipes are usually caused by loose pipes, water hammering to a stop as you turn it off, or hot water pipes shifting in their position. All of these problems can be solved by cushioning and anchoring the pipes.
You can check your toilet for leaks by adding a few drops of food coloring, Kool Aid or some coffee grounds to the water in the toilet’s tank (not the water in the bowl). Check the water in the bowl after a half hour or so. If any of the coloring agent is visible in the water in the bowl, the tank is leaking, and you will have to have it repaired.
Watch how your toilets are flushing. If you have to jiggle the handle or if it takes too long, you might have to repair some toilet parts. Replacing these parts early may help you to save on your water bills and will save you from more expensive repairs at a later date.
Don’t shrug off that trickle coming from your toilet as a small problem. Even the tiniest leak can be quite expensive in the long run as you end up wasting potentially hundreds of gallons of water. See if you can find the root of the leak, or seek out professional advice, and keep your toilet running efficiently.
Many people deal with clogged toilets. However, if your toilet will not flush every time, the water rises to the top, and there is bubbling effect occasionally, this can be due to a much deeper blockage in the main pipe. The main pipe must then be cleaned in order for your toilet to work properly.
Before you can fix a toilet that does not flush properly, it is important that you find out what is causing the problem. Depending on what the problem is, you may be able to fix it yourself. However, more complicated toilet flushing problems may require the services of a plumber.
Avoid pouring grease or oil down your kitchen sink drain. Grease and oil can build up in your pipes and cause a backup. Instead, wait for the grease or oil to cool and solidify and either throw it away or see if there’s a place to recycle it near your home.
To get the best possible price from a plumber, shop around and keep notes. When you get a price quote from the first plumber you call, you can subtly mention that price to the second and see if they will beat it. If you keep doing this down a list, you can drive down the price considerably.
Ask before the plumber comes out if they charge for the consultation. In order to quote a project, the plumber has to come out to inspect your particular issue. It is standard to charge for the consultation appointment but the prices can vary wildly. Ask upfront so that you aren’t surprised by the total.
When plunging a drain to attempt to remove a blockage, first make sure that the drain is completely covered in water. This helps to form a seal. Then, plunge at least fifteen to twenty times before stopping. Repeat the process two to three times. If this doesn’t work, try a chemical drain cleaner.
By now, you have learned a number of great ways to maintain your plumbing. By using the tips at home, you will not only be able to fix any plumbing emergencies, but you will also be able to reduce your costs because you won’t need to hire a professional plumber.…